What Do You Clean Hard Plastic Finish With To Remove A Film

Stacey said, "A Mickey Mouse stuff toy was left on my son'southward dresser. The toy had some type of plastic material covering the feet to brand boots. When we removed the toy it left some of the plastic textile on the wooden surface of the dresser. We tried using different oils and scraping the plastic but have been unsuccessful at removing this plastic stuff. Do you lot have any ideas that can assist????"

When soft plastic items sit in one place for a long fourth dimension, they can become stuck to the surface and leave backside some pieces or balance when the item is removed. Hither'due south how to remove the plastic.

The Heat Method

I of the reasons that soft plastics can do this is that when heated, for example if the surface area was in the sun or if the room became hot ane summer day without the A/C running, the plastic can melt onto the surface, causing information technology to become stuck. This method can help you to remove it.

You lot Volition Demand:

• An atomic number 26
• Brown paper
• Soap
• Water
• A cloth
• A towel

Steps to Remove the Residuum:

1. Start by ventilating the area well. If you can motility the surface outdoors, that would be best.
2. Lay a slice of brownish newspaper over the expanse. If using a brown paper shopping bag, turn it inside out and so that the ink is on the within. Practise non use white paper.
3. Rub a warm fe over the chocolate-brown paper. This volition cause the plastic to cook and the brown newspaper volition blot it.
4. Supersede the paper as needed until all of the plastic is gone.
5. Clean the expanse with lather and h2o.
6. Pat the area dry out with a towel. Water can easily harm some wood surfaces, so quick drying is important.

The Baking Soda Method

Another reason this tin happen is that over time, vinyl items can ooze a sticky residue that would cause it to attach to the surface. Still, regardless if that was the cause of not, this method should work to remove the plastic residue.

Yous Volition Need:

• Baking soda
• Water
• A cloth
• Soap
• A towel

Steps to Remove the Balance:

1. Mix baking soda with a little water to make a thick paste that is virtually the consistency of peanut butter or toothpaste.
2. Use a cloth to rub the baking soda paste over the plastic. Do not utilise much pressure; you don't want to rub off the finish. Just gently rub in circles over the plastic until it rubs off.
3. When the plastic is gone, clean the surface area with soap and water.
4. Pat the expanse dry with a towel. Water can easily harm some forest surfaces, so quick drying is of import.

Additional Tips:

• If the higher up methods take not worked to remove the plastic residue, try using a commercial goo remover that is prophylactic for wood, such as De-Solv-It, Krud Kutter, or Goo Gone.

Was This Guide Helpful?

Reader Interactions

Source: https://www.howtocleanstuff.net/how-to-remove-plastic-residue-from-wood/

Posted by: hilltherenchat.blogspot.com

Share this post